xhost_plus
Oct 19, 11:23 AM
I'll prolly be there.
yogi477
Jul 6, 11:33 AM
I have recently bought an Airport card for my iMac G3 and an Airport Extreme Card for my Powerbook G4. I installed both cards and set up the iMac to share the ethernet broadband connection over Airport, otherwise known as software base station.
I tried it out for the first time yesterday and it worked, once. Since then the powerbook will connect to the network set up by the iMac to share the net connection and everythin else works but the net access just times out when I try to go to a site.
Could this be my ISP (Blueyonder) clamping down once I had used the Broadband service on both computers at once? If so is there a way round it eg. IP masking as a router would so the ISP only see's one IP address? How can I do this?
I am out of guesses what could be the problem so any help would be greatly appreciated.
Thanks
Ryan
I tried it out for the first time yesterday and it worked, once. Since then the powerbook will connect to the network set up by the iMac to share the net connection and everythin else works but the net access just times out when I try to go to a site.
Could this be my ISP (Blueyonder) clamping down once I had used the Broadband service on both computers at once? If so is there a way round it eg. IP masking as a router would so the ISP only see's one IP address? How can I do this?
I am out of guesses what could be the problem so any help would be greatly appreciated.
Thanks
Ryan
wnameth
Jan 24, 07:15 AM
i wish that was true, i have a wireless logitech duo, but i would be willing to trade that for a mac wireless duo.
I'll go for the case
Thanks
I'll go for the case
Thanks
kaspesla
Apr 28, 08:33 PM
FYI, PhoneView does not charge for upgrades. Make sure you're on the latest version.
stridemat
Apr 3, 04:23 AM
I would imagine Parallels would be up to the things you list. Much easier to use, and saves you having to restart your Mac.
Pale Fire
Jul 22, 02:41 PM
As far as I know it has been tested on a flat surface. I'll ask her to try the paper-clip eject, but the eject mechanism consistently works perfectly fine as long as there is no cd inserted, so there is something fishy going on here.
Apparently there is something with the combo cd+tray that seems to prevent the tray from popping open.
Apparently there is something with the combo cd+tray that seems to prevent the tray from popping open.
blow45
Apr 16, 02:26 PM
how much do these two cost? surely they are not free are they?
MaxMike
Apr 23, 01:33 AM
Today I finally got my Verizon iPhone 4 so I almost immediately went to the Apple store to pick up a Pixelskin HD. I pretty much disregarded the price and got it, along with the matte screen protectors from the store. Later on in the day, my friend shows me the case he has for his iPhone 4 (TPU case from eBay, I believe made by Amzer), and that it was much cheaper than the Pixelskin ($7 vs $30). Would it be better to just return the Pixelskin HD and get a TPU case from eBay? Or is the Pixelskin more worth its bigger price tag? Thanks!
CaptainChunk
Apr 25, 12:41 AM
What the seller probably meant is that it won't actually boot in a standard Windows PC, which would be correct.
But a Mac Pro running Windows via Bootcamp, different story.
But a Mac Pro running Windows via Bootcamp, different story.
Patmian212
Dec 21, 08:02 AM
why not just keep the iBook, sell the eMac and buy a new desktop...
Cuz basically my ideal setup would be a higher end desktop and a lower end laptop and the eMac is too lowend, so if I sell it I would need to add a significant chunk of cash for a new desktop.
Cuz basically my ideal setup would be a higher end desktop and a lower end laptop and the eMac is too lowend, so if I sell it I would need to add a significant chunk of cash for a new desktop.
chown33
Apr 9, 05:43 PM
You could define pickerView as an instance variable of the class where slideButton: is defined.
Or you could look around in the documentation for UIView for some way to access all its subviews, then figure out some way to tag the pickerView with a uniquely identifiable tag (hint: search the UIView docs for a way to tag views). That way, you can look in the view itself to see if the pickerView was added or not.
Or you could look around in the documentation for UIView for some way to access all its subviews, then figure out some way to tag the pickerView with a uniquely identifiable tag (hint: search the UIView docs for a way to tag views). That way, you can look in the view itself to see if the pickerView was added or not.
CRAZYBUBBA
Nov 8, 10:25 PM
Did you buy it from a crack head?
an excerpt from Le Marketplace Rules (http://guides.macrumors.com/Help:Marketplace_Rules):
"5. Non-interest. If you have no need for the items or don't like the price, items, payment method, or other terms, ignore the thread. Do not post negative remarks about the sale or seller based on their offer, or suggest to others that they buy other products or buy/trade at other sites. Do not post unsolicited price advice or comparisons of the offer with those from other sources. Do not try to derail somebody else's sale by posting in the thread. Let shoppers make their own decisions."
an excerpt from Le Marketplace Rules (http://guides.macrumors.com/Help:Marketplace_Rules):
"5. Non-interest. If you have no need for the items or don't like the price, items, payment method, or other terms, ignore the thread. Do not post negative remarks about the sale or seller based on their offer, or suggest to others that they buy other products or buy/trade at other sites. Do not post unsolicited price advice or comparisons of the offer with those from other sources. Do not try to derail somebody else's sale by posting in the thread. Let shoppers make their own decisions."
asma123
May 3, 09:56 PM
so this macbook 2.0ghz unibody unfortunately suffered a minor beer spill. I opened it up and cleaned some minor corrosion on the logic board. Took out the keyboard and washed it to remove the stickiness. After everything is put back together, the computer would not charge or recognize the battery properly. I put in a working battery (I have the 2.4ghz model as well) and it does see I've put in a battery, but it would not run on the battery, and the charging percentage will remain at 0%. I've reset pram, smc. I swapped the battery cable and same thing. I can't see any burn marks so I need some help tackling this problem. I have no problem changing IC's as I have hardware repair experience, but I just need to know what to change. perhaps anyone have schematics?
saabmp3
Sep 7, 02:18 AM
AT&T is selling the 4 gig's for $299, the 8 gigs are going for $349 on apple refurb.
I know some people might not like this, but I'm looking to pick up a used one somewhere in the 150-200 range for a 4 gig, 200-250 for an 8 gig.
I'm willing to sacrifice condition for price. The screen must be perfect, but I don't mid scratches on the back.
This might be a great opportunity for you to trade up or just trade in for a brand new iPhone. Hopefully some people are interested.
Ben
I know some people might not like this, but I'm looking to pick up a used one somewhere in the 150-200 range for a 4 gig, 200-250 for an 8 gig.
I'm willing to sacrifice condition for price. The screen must be perfect, but I don't mid scratches on the back.
This might be a great opportunity for you to trade up or just trade in for a brand new iPhone. Hopefully some people are interested.
Ben
jotwah
Sep 3, 07:30 AM
i think it might fit i am so excited to get the new 4g :apple::apple::apple: :D:D:D:D:D:D;);););););) Thanks tho oh and one more question how long does it take to get my iPod Touch?
320driver
Apr 15, 02:24 PM
I have a a1211 Mac book pro with 3mb memory and it works fine except that the display bezel is broken on one side near the hinge. The back case has sperated and it's onlly a matter of time before the other side breaks.
I am trying to decide if I should try to hunt down a bezel and rear case (parts cost I figure $250 to $350 + my labor) to fix the problem or wait and save to buy a new computer.
I am trying to decide if I should try to hunt down a bezel and rear case (parts cost I figure $250 to $350 + my labor) to fix the problem or wait and save to buy a new computer.
goose77
Jun 23, 11:27 PM
What do you think this would be worth to you?
4 x 2.5GHz PowerPC G5 processor
8 GB DDR2 SDRAM
232 GB Serial hard drive
Dual layer DVD & CD burner
Built in Firewire 400 & 800 and USB ports
2 Fibre channels (well over $1000 in high speed connection cards-fiber optic and scsi
2 PCI cards- ATTO, ExpressPIPROUL4D (scsi)
Apple keyboard
Apple mouse
GeForce 6600 (NVidia) Cinema HD
4 x 2.5GHz PowerPC G5 processor
8 GB DDR2 SDRAM
232 GB Serial hard drive
Dual layer DVD & CD burner
Built in Firewire 400 & 800 and USB ports
2 Fibre channels (well over $1000 in high speed connection cards-fiber optic and scsi
2 PCI cards- ATTO, ExpressPIPROUL4D (scsi)
Apple keyboard
Apple mouse
GeForce 6600 (NVidia) Cinema HD
GGJstudios
May 4, 10:38 AM
After a spill, all bets are off, as the extent of any damage isn't known. PRAM/NVRAM has nothing to do with battery/power/charging issues, so resetting that won't help. Resetting SMC can help in many situations. If the charger is working and the battery is good, the only component that's left is the logic board, which could have suffered damage from the spill.
Instructions for resetting SMC and troubleshooting MagSafe adapters are in the CHARGING section of the following link. This should answer most, if not all, of your battery questions:
Apple Notebook Battery FAQ (http://forums.macrumors.com/showpost.php?p=9875442&postcount=23)
Instructions for resetting SMC and troubleshooting MagSafe adapters are in the CHARGING section of the following link. This should answer most, if not all, of your battery questions:
Apple Notebook Battery FAQ (http://forums.macrumors.com/showpost.php?p=9875442&postcount=23)
bousozoku
Aug 12, 06:08 PM
It must have been really difficult to miss the FAQ thread at the top of the list: http://forums.macrumors.com/showthread.php?t=21908
montycat
Jul 31, 10:41 AM
Very imaginative!:)
alan92
Jun 19, 10:22 PM
Who is going there? Anyone know if they are going to open the mall at 7 am because normally it opens at 8 am? And at what time will you start lining up?
AuNate
Apr 20, 07:16 PM
Try again...its confirmed (via another thread) that Apple was having issues with their activation servers. I just tried about 10 mins ago and was able to activate my 3GS...
joshwest
Dec 10, 03:19 AM
Hello everyone i have a loaded out g5 iMac with 2gigs of ram 2 ghz model, its just not running like it should anyone have any ideas my 250 gig hardrive is filled to about 200 so i dont think that should play just alot of beach ball spinning and dont know what to do anyone help me out?
joecapero
Apr 19, 03:52 PM
Updating dropbox to the most recent, stable version and then rebooting Finder fixed this for me.